1. Remove the existing cap on the car tank.
2. If your car has an integrated flap (picture A) fully insert the tube (4) until it stops. This tube is not required for other thanks (picture B).
3. Separate the yellow cap (2) and the black adapter (1). On the black adapter fix the seal (1 for BDF, 2 for BDE) and then install it on the tank screwing it tightly.
4. Take now the yellow cap (2). Before inserting it into the black adapter, turn it until the hole of the yellow cap is aligned with the opening of the car tank, usually downwards. (The word «DIESEL» on the cap can be in any position (picture C)
5. Tighten the 4 screws (3); Key-Cap is installed and you can start filling.
|
